StackRating

An Elo-based rating system for Stack Overflow
Home   |   About   |   Stats and Analysis   |   Get a Badge
Rating Stats for

sawdust

Rating
1575.36 (3,460th) 		Reputation
10,388 (14,615th)
Page: 1 2 3 4 5 6
Title Δ
UBI error: ubi_io_read: error -74 (ECC error) 0.00
How to get details of all modules/drivers got initialized/probed du... +0.42
Issues with implementing checksum bits on a custom protocol in ruby 0.00
Can I select() on a /dev/spidev file descriptor? +1.93
serial c to read in linux with issues +0.41
Stop on newline when using read(...) +1.65
Size constraints of initramfs on ARM? +0.42
ARM stucks at "Starting kernel image ..." sometimes 0.00
How to boot bare board binary from U-Boot? 0.00
How does "fastboot boot <kernel>" works internally? 0.00
Linux device driver - memory mapped I/O example discussion 0.00
Intel chipset - GPIO programming 0.00
GSM modem is response too late 0.00
U-boot will run on single core? 0.00
Can u-boot support more than one ethernet port? 0.00
Linux Serial Read throws Error +1.13
_start definition in U-boot source 0.00
Interpretation of gpio: in fixed-regulator device tree entry? +0.43
Building kernel uImage using LOADADDR 0.00
How GPIO is mapped in memory? 0.00
How to make a script run in buildroot as a boot script after init 0.00
Why there is `gpio_request` instead of `request_region` in raspberr... 0.00
Counting bytes received by posix read() +1.18
How to boot Linux kernel from u-boot? -0.13
USB-Serial communication giving strange output -0.57
Asix usb to network adapter doesn't work (kernel 2.6.32.17) 0.00
C write serial, redirect to file, terminate 0.00
reading from serial port in c breaks up lines +0.44
Cannot mimic the action of `echo` command in C code +0.44
Linux kernel detecting the pre-boot environment for watchdog +0.43
open file fail(-1) with different flag settings 0.00
u-boot flash emmc ttl serial 0.00
Linux Serial RS-232, 8th bit always clear (set to 0) 0.00
Serial port not responding on boot 0.00
Relocating U-Boot from internal ROM to SRAM on AT91RM9200 +1.74
What can be removed from the Linux i2c-dev driver to serve as a bas... 0.00
Why characters received in serial connection only after pressing en... 0.00
Parsing time-delimited UART data 0.00
uboot - set an test a local variable in a script 0.00
Embedded Linux Newbie Questions 0.00
reserve system memory, ioremap()? -0.54
Driver code in kernel module doesn't execute? 0.00
ioread32 followed by iowrite32 not giving same value 0.00
Linux: boot arguments with U-Boot and Flat Image Tree (FIT) +3.47
Write/Read command to the specified port 0.00
What would you write kernel module for? +3.45
Linux I2C file handles - safe to cache? 0.00
How this code snippet is working in I2C controller 0.00
Linux Blocking vs. non Blocking Serial Read 0.00
makefile for serial communication between two processors (gcc) 0.00